Overview
A primer, sealer, and finish in one, Grade 1 requires no washing down and no additional primer. The finish gives you resistance to cracking, flaking, and peeling and contains a biocide to protect the dried coating against fungal degradation. Not intended for exterior surfaces or for application on floors or decks
- Durable and washable
- Breathable
- Self-priming
- Seals difficult stains
- Protects agains fungal degradation
- Tintable to RAL, NCS, Brand Colours and British Standard 4800, 381C and 5252F
Tinted Colour Information
Tinted paint is custom mixed in house at Next Day Paint using our Zinsser tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.| Area | Interior |
| Recommended Use | Plaster, concrete, mortar, chalky materials, distemper, limewash and whitewash: on walls, ceilings, doors, trims, windows and cabinetry. |
| Coverage | Up to 10m² per litre |
| Drying Time | 30 Minutes Touch Dry |
| Re-Coat Time | 2 Hours |
| Recommended Coats | 2 Coats |
| Application Method | Brush, Roller, Airless Spray |
Preparation
Always ensure the surface to be treated is clean, dry, sound, and free from any dust or possible contaminants that may interfere with adhesion.
- Wash the surface with an appropriate cleaning solution or solvent
- Remove excessive chalky material and any unsoundly adhered coatings
- Remove mould with an appropriate an cleaner, such as
- Seal knots and sap streaks with
Note: Special precautions should be taken during surface preparation of pre-1960 paint surface as they may contain harmful lead.
Application
Before applying we always recommend to test a small area of the surface to be treated to ensure you are happy with the finished results.
- Shake or stir well before application
- Apply using a high quality brush, roller or sprayer
- Ensure temperature is between 4° - 32°C
- Avoid working in direct sunlight, do not apply if wet weather is forecast
- Apply the first coat and allow to dry for 2 hours
- Apply a second coat, paint will fully cure in 7 days
Note: Strong colours may require extra coats or a primer to achieve full strength and opacity we recommend using tinted to match the top coat. Always follow the manufacturer's instructions found on the tin.
