Overview
Zinsser All Weather Masonry Paint is a flat matt, self priming, breathable exterior masonry paint for bare or painted concrete, render, stone and brick. It adheres well to existing paints and gives long lasting protection.
- Flat matt finish
- Resists dirt
- Showerproof in 20 mins
- Can be applied down to -5°C
- Tintable to RAL, NCS, Brand Colours and British Standard 4800, 381C and 5252F
Tinted Colour Information
Tinted paint is custom mixed in house at Next Day Paint using our Zinsser tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.| Area | Exterior |
| Recommended Use | Long term decoration of bare or previously painted concrete, render, stone and brickwork |
| Base | Oil-Based |
| Coverage | Up to 12m² per litre |
| Drying Time | 1-2 Hours Touch Dry |
| Re-Coat Time | 3 Hours |
| Recommended Coats | 2 Coats |
| Application Method | Brush, Roller, Conventional Spray |
| VOC Levels | High |
| Clean Up | Remove as much paint as possible from the equipment before cleaning with brush cleaner |
Preparation
Always ensure the surface to be treated is clean, dry, sound, and free from any dust or possible contaminates that may interfere with adhesion.
- Remove all loose or peeling paint and chalky residue, and sand the edges of any remaining paint to ensure a smooth surface
- New concrete, masonry, and other related surfaces must be cured for at least 30 days before priming
- Remove all existing mould or mildew this can be done with a suitable fungicidal wash
- Fill any holes or gauges
- For bare or porous surfaces apply a mist coat of the AllWeather Masonry paint, thinned with white spirit
Note: Special precautions should be taken during surface preparation of pre-1960 paint surfaces as they may contain harmful lead.
Application
Before applying we always recommend testing a small area of the surface to be treated to ensure you are happy with the finished results.
- Shake or stir well before application
- Apply using a synthetic bristle brush, roller, or sprayer (for airless spraying, use a .017” tip and high-medium 2000-2500 PSI pressure)
- Ensure temperature is between -5° - 32°C
- Avoid working in direct sunlight, do not apply if wet weather is forecast
- Apply the first coat and allow to dry for 3 hours
- Apply a second coat, paint will fully cure in 7 days
Note: Always follow the manufacturer's instructions found on the tin.
